high head submersible pump

Kingda is a famous manufacturer of high-head submersible pumps that delivers exceptional performance, every time and has been on the market since 1949.

  • Reinforced double silicon carbide mechanical seal for duty application


  • High-quality cable sealing to ensure protection against water leakage


  • Efficient electric motor 


  • High-chrome impellers provide higher wear resistance

high head submersible pump, what is it?

High-head submersible pump designed in any different implementation that requires long pipe runs or heavy-duty high-lift situations for dirty water, sump, wastewater system and industrial pressure pump applications. The term ‘head’ refers to the height a pump will push liquid up into the air. A high head pump produces more pressure and will push the liquid up further. Generally, this pump can run for six to 24 hours continuously, depending on how heavy the slurry is, and also it depends on the quality of your pump.

When you’re looking for a different kind of pump, don’t hesitate to choose us, Kingda. We are producing high-quality products like low flow high head submersible pump, high head submersible sewage pump, submersible effluent pumps. Please contact us for more information.

related products of submersible pump

portable dewatering pump
close impeller submersible pump
self-priming submersible pump
single stage submersible pump
electric submersible pump

advantages of high head submersible pump

convenient and easy to use
corrosion resistant
energy saving

applications for high-head submersible pump

  • Agricultural irrigation and water supply in slope areas.
  •  Shallow well.
  • Water supply system of apartment, building.
  • Spraying system of yard and garden.
  • Any kind of high head water supply

High head submersible pump features

  • Unique aluminum alloy offers the perfect combination of strength, lightweight, and corrosion resistance.
  • Heavy-duty bearings to withstand shocks and overloads.
  • Water density up to 14.18 lb/gal.
  • High-quality cable sealing to ensure protection against water leakage.
  • Reinforced double silicon carbide mechanical seal for duty application.
  • A wide base ensures stability while enabling the passage of large solids.
  • High chrome impellers provide higher wear resistance

how do i check the pump rotation?

It is a good idea to get a certified electrician to help with this process. We have an expert who can help you with this problem. A few things to know is that you check the backward pump. Rotation is indicated on the head of the pump; you’ll see an arrow going counterclockwise. This is the direction you want the pump spinning. If you turn the motor around and look at the backside and remove the cap, you’ll see a shaft located in the center. When the pump is running, you will want to see the shaft spinning clockwise. That will verify proper pump rotation on your system.

how we works

Kingda company has experience, mature technology, and high-quality, reliable screw pump design. manufacturing, testing, after sales service engineer team. We provide customers with high-quality products, excellent solutions, and efficient services in the field of fluid systems. at present, Kingda group owns 12 subsidiaries, our annual output of production is 13,000 sets/ 13,000 tons, and we supply all kinds of pumps and systems, and other products.

typical applications

Agricultural irrigations and water supply in slope area

Choosing the right pump for your irrrigation system means evaluating all aspects of that system- from the source of water to the amount of land being covered, the number of sprinklers and the budget available- and asking which type of pump will do the most efficient job. There’s no right or wrong answer to the question, as the best pump or pumps choose Kingda. So the first stage of choosing any pump will always be a careful audit of exactly what level and type of irrigation is needed.

shallow well

 Shallow well pumps are generally located above ground to lift water out of the ground through a high-head submersible pump. The typical limit for a suction pup is 33.9 feet at sea level, which is one of the atmosphere of air pressure, -760 torr. Some shallow wall pumps may be able to provide greater lift. But the normal limit for a shallow wall pump is 25 feet at sea level. This limit declines with higher altitudes. Shallow well pumps are used mainly when the water is near the surface on in an artesian well. The shallow well is usually using high head submersible pumps.

Spraying system of yard and garden

A high head submersible pump can be used in spraying of yard and garden. It is usually filled with concentrated powder or liquid and water is added to the desired dilution. After the pump is primed and the pump head attached, it is ready for use. When you want to apply a light coat of material simply pump up and spray, maintaining consistent pump pressure as you work.

water-supplying system of apartment, building

Most water distribution pumps are of the centrifugal type, in which a rapidly rotating impeller adds energy to the water and raises the pressure inside the pump casing. the flow rate through a centrifugal pump depends on the pressure against which it operates. The higher the pressure, the lower the flow or discharge. 

Kingda the most preeminent brand manufacturer of high head submersible pump

At Kingda we believe in providing quality service that entails tailor-made solutions, product identification, implementation, maintenance, and customer feedback. We offer assistance technically to our industrial clients to commission and install the pumps effectively.

our service

  • Highly advanced design

With the help of our special software and advanced hydraulic models at home and abroad optimize the impeller and pump body design, which can reduce hydraulic loss and improve efficiency.

  • Various materials available

Kingda pumps adopt different materials for different mediums to meet the requirement of work conditions, including gray ion ductile iron, cast steel, stainless steel, copper anti-wear, and anti-corrosion materials.

  • Standard manufacturing process

Being devoted to the slurry pump for more than half a century, now Kingda has its own SOP for all the production processes to make sure high quality and stable supply.

  • Strict quality control

An expert team and special equipment will carry out the quality inspection from the ever beginning, from the material to the balance, and finally the whole pump property testing.

Have More Questions Please Contact Us

Bottom FAQ

The high-head submersible pump is designed for many applications. It is mainly used in dirty water, sump, and even in wastewater treatment systems. It can push liquid more pressure.

The price is determined by the customer’s choice of different pump models and required data parts, so for a detailed quote, you can contact our salesman directly.

Yes, we can provide most documentation including certificates of analysis, /conformance, insurance, origin, and other export documents where required.

  • Highly advanced design
  • Various materials available
  • Standard manufacturing process
  • Strict quality control

We'd like to work with you

Send us a message if you have any questions or request a quote. Our experts will give you a reply within 24 hours and help you select the right pump you want.